HOME SCHEME PRODUCT BRANCH ACHIEVEMENT CERTIFICATE CAREER CONTACT
Select
 
Select
Select
LPLC
Select Select
Introduction of Product
MK-80 Series of intelligent high frequency switching DC power supply
MK-TX Series of high frequency switching communication power
MKF Series of battery activation equipment
HPLC Series of high-voltage reactive power terminal compensation equipment
HPIC Series of high-voltage reactive power integrative compensation equipment
HPAC Series of high-voltage reactive power automatic compensation equipment
HFPC Series of high-voltage filtering and compensation equipment
HPJK-A series compensation control and protection device
HPJK-L series compensation monitoring and protection device
LPLC Series of low-voltage reactive power terminal compensation equipment
LPAC\LPFC Series of low-voltage reactive power automatic compensation equipment
LFPC Series of low-voltage filtering and compensation equipment
APF Series of Active Power Filter
LPJK Series of compensation control and protection Device
AP1 Series of AC Converter
AJ1 Series of AC motor soft start equipment
AS1 Series of DC motor control equipment
UP Series of uninterrupted AC power supply
Class A agency for SAMWHA Capacitor

LPLC Series of low-voltage reactive power terminal compensation equipment

Select

Overview

terminal compensation of reactive power is a technique that very save energy significantly. MECC PHAYSE's product LPLC uses the metal-outer-shell, built-in vacuum-metal-film, metallized polypropylene film capacitors. LPLC has simple and reliable structure, and can save energy at relatively low cost. The equipment is directly connected with the motor and is switched on and off simultaneously, which can improve the start-up characteristic and the power factor of motor, and is a ideal energy saving equipment.

Features

Low dielectric loss: dissipation is less than 0.2 watt per kvar, while the total loss (including the discharge resistance) is less than 0.5 watts per kvar; Under rated condition, the loss of full-film power capacitors is less than 0.2%, one-fifth of the oil-Paper capacitor;

With self-discharge components: residual voltage drop to 50 volts within 1 minute after tripping ;

Self-healing: when over-voltage occurs, the adjacent metal electrodes vaporize instantly, thus isolating the fault, so the capacitor coule continue working;

Easy to use, simple wiring, dry structure could avoid pollution or oil spills;

Safe and reliable, switching on and off with load simultaneously, long life expectation.

Compensation Effect

Improving Power Factor above 0.97, saving energy and reducing cost;

Improving quality of Power Supply, ensuring electrical assemblies' safty;

Lowering loss of line and transformer;

Improving the start-up characteristic of AC motor;

Reducing the apparent Power, thus increasing the capacity of transformer, and extending the life expectation of electrical equipment.

Condition of Use

Altitude:  Less than 1000m (above1000m should adopt plateau-type components)

Temperature: -25℃~+40℃

Humidity : ≤95% (at 25℃)

Temperature rise: 15℃ at the surface

Nominal System Voltage: 415V, Frequency: 50Hz, can operate continuously under 105% rated voltage.

No explosive or flammable medium surrounding; no corrosive gas to damage the insulation and the metal; no conductive dust; No severe vibration and shock at the installation site.

Power supply meets national standards and no too strong harmonics current in power supply.

Implementation and reference standard

IEC 60831-1-am1 ed2.0

GB/T 12747.1-2004

GB 50227-2008

GB 12497-2006

JB/T 7113-1993

Main technical performance

Degree of Protection: Indoor (IP2x to IP4x); outdoor (up to IP41)

Withstand Voltage: Voltage of 2500V, 50Hz against earth for 1 minute, with no breakdown and no flashover.

Insulation: 500V mega-Ohmmeter (100 MΩ range) check the main circuit insulation resistance of the relative should not be less than 1 MΩ, 0.5MΩ if the site is wet.

Noise:Less than 45dB.

Keywords: LPLC Low-Voltage reactive power terminal compensation

back to top

SHENZHEN MECC PHAYSE ELECTRIC EQUIPMENT CO., LTD
Address: Unit A, 5th Floor, Block TianJing 3.8, Tian'an CheGong Temple Industrial Park,
FuTian District, Shenzhen. Zip Code:518048
Reception: 0755-83584989  Fax: 0755-83866963
Sales Tel: 0755-83866962 (Ms Yan),0755-83586164 (Ms Chen),0755-83866985 (Ms Ma)
Technical Support: 0755-83875432 After-sales service: 0755-83866942 E-mail:market@mecc-phayse.com

Copyright 2002-2011 SHENZHEN MECC PHAYSE ELECTRIC EQUIPMENT CO., LTD. All Right Reserved. 粵ICP備11100910號